16 Dec 2023

16.12.2023 Brooks B67 v Contec Pt.1

 ~o~

 Saturday 16th 44F/6C. Milder but still grey. Up at 7.40 after waking in the dark. 

 8.30 Beginning to lighten outside. 62F/17C in the room after 68/20CF at bedtime. 

  9.30. Time to stop waffling and go for a walk! That will save me having to light the stove until I get back.

 Brooks B67 box opening.

 10.30 Back from my walk. Another dark, grey day. The wind made it feel much cooler than the thermometer suggested. I saw several large birds of prey soaring and being buffeted by the wind.

 My parcel has arrived while I was out. Excellent service from the Danish, Cykelshoppen.dk and GLS. On a Saturday too. I only ordered the new saddle yesterday afternoon. A Brooks B67 to compare with the Contec. I did not want to be without a saddle if the milder weather allows a ride. I dare not trust the broken frame of the Contec in case it leaves me unable to get home.

 Initial impressions of a new, Brooks saddle are always good. The B67 is nicely packaged and presented. Another free, tension spanner to add to my collection. A sachet of Proofide and a folded instructions sheet. The dimpled leather top doesn't actually feel at all like leather. Typically slippery Brooks leather as new. Do I sense stainless steel rivets this time? Instead of the rust prone chrome of the last two centuries. Or the copper rivets of the upmarket models. 

 The Contec is 208mm wide x 285mm long. The B67 207mm x 275mm long. All measurements taken directly from the undersides of both saddles. Close enough to hardly notice the difference. Brooks states the B67 is 205x265mm. Their measurements appear to be conservative. The length will also increase with re-tensioning after break in. The Contec already has thousands of km on it. It has been re-tensioned several times.

 Saddle slipperiness is a very mixed blessing. Too shiny and it is very difficult to stay in place. Typical of a new Brooks. Too grippy and one's clothing moves around with the saddle. Padded vinyl and man made materials. It's the difference between trying to perch on a spherical, polished, beach pebble [new B17 Brooks] and enough friction just to be able stay onboard. 

 A dollop of Brooks Proofide wax treatment will usually reduce the slipperiness. If only temporarily. I treated the Contec with Proofide early on. And then later. To take off the initial shine and repeated it as required. From long experience of purchasing several Brooks saddles I don't find the Proofide does much to soften the new leather. It's all about making it possible to stay on the bike/trike! However, these wider saddles have a larger area for depression by the sit bones. Which will make them subjectively softer.

 I talked a lot about saddles yesterday while searching online about wide saddles. Then I read a forum post about prostate problems caused by cycling and saddles. The first time I had heard the two put so clearly together. There was the suggestion that carving a saddle helped relieve pressure on the prostate.

 "Carving" refers to deliberately making a long, elliptical cutout in the middle of the saddle. Many modern saddles are now adopting this tactic in their design. Sometimes taken to extremes. Where two parallel ridges presenting no surface at all to the sensitive middle of the rider's crutch. 

 I'll have to do some more research on the connection between cycling and the prostate. The sudden improvement in my "waterworks" may have been a direct result of a huge reduction of e-bike riding. Due to the onset of bad [winter] wet weather. 

Brooks B67 underside.

 The broader Contec saddle has certainly made my life more comfortable than before. Though I still suffered from saddle soreness on longer rides and even on some shorter ones. I have suffered from saddle soreness all of my life. Even as a teenager on a rock hard, Unica Nitor plastic saddle. Which was much cheaper and lighter than a Brooks leather saddle. I clearly remember experienced club cyclists telling me to change to a Brooks. I never followed their advice.

 My recent take on the saddle soreness was moisture build-up in the crutch area. Even when I was wearing only a pair of thin, padded "racing" shorts. My idea was to take a spare pair of shorts with me. Then change into dry shorts at halfway on a longer ride. Probably involving wet wipes to reduce any remaining skin moisture on the sensitive areas. My skin would probably already be sore from friction. So any change would have to be judged from that standpoint. 
 
 Tiredness and saddle soreness always seem to go together. As I near home I run out of energy and suffer saddle soreness at the same time. The huge advantage of the e-bike is the ability to increase motor assistance to get me home. Turbo mode's 320% assistance goes a long way even at low speeds. On a purely manual bike or trike my tiredness would always prolong the agony into extra hours in the saddle! Not so on the e-bike.  

Brooks B67 [left] side by side with the Contec. The B67 is a bare few millimetres smaller according to the specs. I was prepared to believe them. The smoother Contec looks larger.

 
 I do not sense that I am feeling localised bone/saddle pressure on a ride. Though hat area feels sore when I sit down afterwards. It actually feels much more like friction during a ride. Cooler weather riding can involve multiple layers of clothing between myself and the saddle. Even though I carefully choose flat seams in the crutch area for cycling clothing. The volume of cloth trapped between myself and the saddle inevitably increases. Comfort, or rather a lack of pain, is vital to the full enjoyment of cycling.

 The latest sales gimmick, for expensive saddles, is carbon fibre mesh. The thickness of the mesh filaments can be adjusted to provide local variation in resistance to pressure. Perhaps the greater advantage is simply the vast increase in airflow between the rider's crutch and the saddle? Which, taken to my usual loony extremes, would mean drilling lots more ventilation holes in a leather saddle. I'll have to think about that before I get the drill out. Where and what size may matter. If only for longevity of the leather.

 The [hole] carving and even the bifurcation of the latest saddles may be reducing moisture build up. Not just providing local pressure relief. The problem with friction is that it often occurs on each side. Rather than down the centre. Where even racing shorts would have material and sponge each side adding to the thickness.

Brooks B67 [left] beside the Contec from underneath.
The B67 is more delta shaped than the Contec. I ran into problems with the Contec until I tipped the nose up a little. The leading edges of the delta were pressing into the junction of my thighs and buttocks. It will be interesting to see how the Brooks limits movement in this area while pedalling.

 It must be remembered that no two cyclists have the same anatomy. The distance between their sit bone protrusions varies. As does the shape of these bones. The muscular form and weight of the rider varies even more. Yet everybody is expected to climb onto an average saddle. Whose price can vary from many hundreds of pounds to mere, pocket change. Though Asian copies can reduce the price of the most desirable saddles. They may not enjoy all the attributes of the big name labels. Who [one hopes] have done some research to warrant the huge price ticket. Rather than merely providing more bonuses to their hype-marketing department.

 Cycling is all about sales from media hype. Much of which comes from copycat purchases. If the TdeF stars are using something then surely it must be good. Which often ignores the simple reality. Of generous sponsors demanding their own kit is used. Even if it seriously impairs the performance and comfort of the "star." On whom much depends on race results to match their astronomical salaries!

 11.30 More waffling! I really ought to put the Brooks B67 on the Moustache and have a test ride.

 The B67 is 1cm taller on the seat post clamp than the Contec. I used a tape measure. I could feel the difference immediately and lowered the dropper post accordingly. I didn't dress for the cold wind. So limited myself to riding up and down the drive. Saddle nose adjusted up slightly after carefully setting it level for the first trial. Suddenly, and oddly, it feels as if I have a fixed position on the saddle. Like sitting in a bucket seat. The B67 feels far more comfortable than any of the B17 variants I have had from new. Or any other saddle for that matter. The Contec was similar to the B67.

 The initial slipperiness seems to have gone with the small change of angle. No obvious problem with the leading edges of the delta shape. Though a few hundred meters is not a true test. I'd have to dress more warmly to ride around the block. There are strict rules about helmets and carrying proof of 3rd party insurance on these e-bikes. So it's not a case of just setting off for a test ride. I'd better get dressed for a ride now or it will be lunch time.

~o~

15 Dec 2023

15.12.2023 Contec Classic Exclusive saddle frame broken!

 ~o~

  Friday 15th 41F/5C. Heavily overcast. 150 yard thick mist and very damp. Up at 7.30 after waking earlier and failing to gain altitude. 

 9.00 I ought to go for my walk before sloth sets in. 

 10.00 Back from my walk to the lanes. Much milder. I wore my dayglo cycling jacket for visibility in the mist. Backed up by the Puma boots with white bumper strips. Everybody [the traffic] gave me an unusually wide berth. Which avoided tyre spray from the wet roads. A pheasant dashed away as I passed. I started talking to myself on the way back but couldn't get any sense out of him. As usual. Not much else to report. 

 Broken Contec saddle frame member!

 Morning coffee over. I have a grocery shopping list. Which must be attended to this morning. It has reached 65F/18C in the room. The baskets full of  logs from the greenhouse are coming in at over 20% moisture content. I am experimenting with larger logs. Just to see if they will burn without my splitting them. Fine so far. It just needs enough air to keep the og  burning steadily on a red fire base.

 I was just comparing the Contec saddle to a very similar Brooks. When I noticed the spring frame is broken! Purchased in April of this year. So only 8 months from new. The frame member could be replaced if I can find a source. The village cycle shop where I bought it has very sadly closed down. So I can't return the saddle for replacement under guarantee. 

These images show the broken frame member[ arrowed above] Smaller arrows indicate the horrible sharp bends. Which should never be used on a stressed, spring steel wire frame. The sharp corners act as local stress points and must seriously risk breakage. I am a modest 75-80kg. [12 stone]

 Examination of the entire saddle frame showed crude bends at all major stress points. Bends should be smooth and made to a small radius. Not bent over a sharp edge! This is a great shame. I really liked the Contec. It provides the width so vital to an upright position. Over which I have no choice. As my ageing hands and wrists can no longer tolerate a leaning forwards position. There is too much of my [modest] weight thrown onto my hands. 

 The Contec saddle cost me about half the retail price of a near identical Brooks shop price. Yet the Contec has many plus points in its favour over the Brooks B67. Thicker leather, connected side skirts, hex key tension adjustment, all chromed frame amongst others.  

A wider view of the Contec saddle.
Showing the upper frame wire break

 The skirts can be tied with shoes laces if they flare after some use and abuse. I did that to my B17 Special. Though this hardens the ride to some extent it extends the saddle's useful life considerably. The flaring of the skirts must provide some extra comfort on rough roads. Though only in the centre of the saddle. Where there really shouldn't be too much pressure anyway. 

 Hence the craze for carving or moulding elliptical slots in many saddles. To relieve pressure on the perineum. This whole subject may be highly dependent on the rider's forward lean angle. 

 I see the B67 is readily available at about 900 Danish Kroner. [About £105 GBP] The B67 has a textured [dimpled] leather top. While the Contec is smooth but naturally aged. I like both saddles for their looks on my all black, Moustache e-bike. Which, to my eyes, pretends to be an old motorcycle from the early 1900s.

  The Brooks B67 is closest to the Contec in design. Though the B67 is slightly smaller in width and length. Some of the Brooks sprung saddles will not fit a modern seat post. I am using a dropper post so have zero choice in this matter. The dropper post uses the modern micro-adjustable saddle clamp. 

 The Moustache is lethal [IMHO] without a dropper post. This is due to the very high bottom bracket height. I literally dropped the Moustache onto the handlebar end several times before I fitted the dropper post. The ground is simply far too far away when dismounting. I have a Medium frame size. Which matches my height. 

 Both saddles have springs at the rear [for rider suspension] but have only a frame pivot at the front. Most of the rider's weight is on the wide "bench" at the rear of the saddle. So the lack of forward springing is of less significance. While still providing greater rider comfort over rough roads. 

 Some Brooks models have more of less complex springing at increased weight. Some have multiple springs running fore and aft. The risk of any springs is the saddle rocking laterally while pedalling. The Contec and B67 may be slightly less likely to rock sideways due to the fixed front pivot. 

 I noticed the Contec knocking loudly early on yesterday's ride but forgot to check the reason when I came home. It had stopped knocking because the broken spring had moved sideways against the inside of the skirt.   

 In the absence of a local Contec cycle parts dealer I have emailed the company in Germany with images of the broken saddle.

 A shopping trip in the dark allowed me to catch up on my missing groceries. I went in the old car.

 Then it took me half an hour to do the backlog of washing up. I don't know why I am so loathe to do it on a daily basis. I had run out of every plate, bowl, mug, pan and cutlery.

Dinner was salad. The 6 minute, boiled eggs were still runny but acceptable.

~o~

14 Dec 2023

14.12.2023

 ~o~

 Thursday 14th 33F/1C. Up at 6.30 after a disturbed night. The beer with dinner was to blame. 

 7.00 15C/60F in the room. Lit the stove. Going well.

 9.00 I don't think it is going to get any lighter. Time for a walk. Two hours of the stove going and it has only reached 63F/17C in the room.

 9.45 It was unpleasantly cold but dry. I limited my walk to halfway to the lanes. I passed a hedge with about 50 sparrows staring at me. Most of them really didn't want to move away. I should have mentioned the many birds of prey sitting quietly in roadside trees. Probably saving energy. A red kite was circling low over a village yesterday. Completely ignoring the traffic. It must have spotted something tasty in a back garden.

 As the roads are dry I could risk a ride on the-bike. Though not very far and I'd need to dress warmly. The cold is reinforced by my increased forward speed. Potentially causing wind chill. Moreover, the forced headwind flattens my jacket against my chest. This has proved unpleasant even in warmer weather. It requires more layers or some kind of padding. Perhaps a thick jumper under the jacket over the usual layers? I'd normally rest wearing anything providing added warmth. As it quickly leads to sweating. Which, on a purely manual trike always meant an ice bath on the next descent!

 My favourite, old, cycling jacket's zip has finally gone bad. This jacket is/was probably at least 15 years old. Ex-charity shop and getting badly frayed from my frequent use. It is/was much thicker than modern clothing. With a slightly fluffy inner surface. It didn't have the cold feel of modern windproof/rainproof jackets. It was very reliable even in the rain. Despite being made of an almost, fleece-like material. Though denser on the outer surface. It was an official Danish cycling club's winter jacket and covered in sponsor's advertising. The shop is still going strong. This was my goal for my longest e-bike ride in the summer. (140km/85miles)

 12.30 36F/2C. Heavy overcast, light wind. I have just returned from a 26km ride to the shops in wo villages. Apart from my face I was comfortably warm thanks to a heavy jumper under my Endura jacket. My hands were fine in GripGrab split mitts. They really are excellent without being too warm. The fur lined Puma trainers/boots were slightly too cold and far too slippery when wet. Fine when the soles were dry. 

 The broad gauge, Contec Classic Exclusive saddle continues to be mostly comfortable for my upright position. I regularly ride shorter distances in normal underwear under trousers. Rather than padded "racing" shorts. On a well worn, Brooks B17 Special I would always wear racing shorts. Even for a 6 mile round trip to the nearest village supermarkets! Otherwise I would get saddle sore!

 13.00 Lunch. The huge bunch of organic bananas was not the bargain it seemed. Despite pretending to be yellow, they are chewy hard and so unripe that the skins are welded to the fruit! I had to make longitudinal slits in the skins just to get them off.

 18.30 32F/0C. 67F/19C in the room. It feels cool and draughty but isn't. I think I'll go with salad tonight. I have been rather overdoing the greasy spoon dinners. No ill effects but it can't be good for me. Whoops! I didn't buy any tuna or eggs! Now what? I have nothing suitable to replace them. Salad would be horribly bland without a centrepiece. Back to the greasy spoon. Sausage and mashed potato with gravy? Otherwise its toast. I've just done the mackerel. So it would have to be cheese. Chicken and mushroom curry? 

 Nope. Beans on toast. Lazy git dinner.

~o~